8525 G2 – coletores de dados robustos para instalação em veículos

Antenna, 2.4 GHz 0 dBi Mag Mount RP-SMA

An antenna mounted on the top of the forklift truck is ideal for extending the coverage area of your vehicle mount computer.

Part No: 9009793 Model No: N/A

 

Antenna, 2.4 GHz 5 dBi Randome Mag Mount RP-SMA

An antenna mounted on the top of the forklift truck is ideal for extending the coverage area of your vehicle mount terminal.

Part No: 9009794 Model No: N/A

 

Mag Mount for Narrowband Antenna, SMA, 12' cable

To mount a narrowband antenna on the top of a forklift truck.

Part No: N/A Model No: N/A

 

Antenna, Narrowband 1/4 wave, 406-512 MHz 6" NB

A narrowband antenna is required for connecting to a narrowband wireless network (antenna installs on vehicle mount radio dome).

Part No: 92864 Model No: N/A

 

Antenna, 2.4 GHz dipole 2 dBi reverse polarity SMA connector

Dipole antenna allows your vehicle mount computer to connect to a 802.11 wireless network.

Part No: 20667-002 Model No: N/A

 

Right Angle SMA Reverse Polarity Plug-Jack Adapter

Provides additional direction options for your antennas.

Part No: N/A Model No: AR1000

 

Cable, Service USB/RS232/PCON

Cable required for service to your Vehicle Mount Computer.

Part No: 1008103 Model No: N/A

 

Cable, Aux Port (26 pin) to USB Host (x 2) and USB device

Use your aux port as a USB hub to support up to 3 USB hosts and devices.

Part No: N/A Model No: CA2200

 

Cable, 6', JB5 Connector to USB slave

Connect any USB device to your JB5 port.

Part No: N/A Model No: CA1020

 

Cable, 6', JB5 Connector to D9 male serial null

Connect your D9 male serial device to your JB5 port.

Part No: N/A Model No: CA1015

 

Cable, 6', JB5 Connector to D9 male serial

Connect your D9 male serial device to your JB5 port.

Part No: N/A Model No: CA1010

 

Protective Cover for Touch Screen (package of 12)

Keep your vehicle mount computer screens safe from damage and clean with these handy protectors.

Part No: N/A Model No: VA6110

 

VESA Plate (for 4" or 12" RAM arm)

The VESA plate can be used with the 4" or 12" RAM arm to mount a vehicle mount computer on any plane.

Part No: N/A Model No: MT3501

 

Clamp Base (for 4" or 12" RAM arm)

Clamp the RAM arm on bars with square or rectangular cross section.

Part No: N/A Model No: MT3505 / MT3507

 

Mount, Adapter Bracket Kit for 82xx Quick Release Mount

These adapters allow your existing 82xx mount to adapt to the quick release of the 8525 G2 / 8530 G2 vehicle mount computers.

Part No: N/A Model No: MT3210

 

Quick-Disconnect Cradle Mount

The quick-disconnect cradle mount allows you to easily dismount your vehicle mount computer (not for use with RAM mounts).

Includes adapter brackets for 8525 G2 and 8530 G2.

Part No: N/A Model No: MT3200

 

Resilient Mount Helical Coil

The Resilient Mount Helical Coil is a braided wire coil that is mounted between the vehicle and cradle to absorb vibration.

Part No: 17538 Model No: 8826

 

Standard Cradle Mount Kit

The standard cradle mount allows mounting of additional RAM mounts including round and vesa plate types.

Part No: N/A Model No: MT3100

 

Heavy Duty Mount

The Heavy Duty Mount is available for both 8525 G2 and 8530 G2 and allows a secure mount on trucks with cabins made of beams. It also offers mounting the computers in different positions and angles. The Heavy Duty Mount is recommended especially for bigger trucks.

Part No: N/A Model No: MT3410 / MT3411

 

Round Plate (for 4" or 12" RAM arm)

Centric, smaller footprint.

Part No: N/A Model No: MT3502

 

RAM mount, 4" arm with 1 VESA plate

The easily installed RAM mount allows a terminal to be mounted on any plane of the 360 degree locking system. 4" short arm.

Part No: N/A Model No: MT3401

 

RAM mount, 12" arm with 1 VESA plate

The easily installed RAM mount allows a terminal to be mounted on any plane of the 360 degree locking system. 12" long arm.

Part No: N/A Model No: MT3402

 

Rail Base (for 4" or 12" RAM arm)

Clamp the RAM arm on round tubes.
1-1/4" to 1-7/8" and 2" to 2 1/2" pipe diameters.

Part No: 9007509 / 9007510 Model No: MT3509 / MT3510

 

Quick Release Mount Turn & Lock

The Quick Release Mount “Turn & Lock” is available for 8515, 8525 G2 and 8530 G2, and allows a dismount with a flick of the wrist in no time and without the need of tools.

It can be used alone or in combination with the RAM mounts.

Part No: N/A Model No: MT3250

 

Power Extension Cord

This power extention cord is ideal for connecting your vehicle mount computer to the forklift power supply.

Part No: N/A Model No: CA1210

 

Power Supply 18V 3.3A 110/220VAC with Cable

18V 3.3A 110/220 VAC with cable.

Part No: N/A Model No: PS1400